Cinelli Vigorelli 2010

i owe you a pound

it was an extremely long and complicated process involving many complex steps...

STEP 1: Buy paint

STEP 2: Spray paint at fixiebike

So you sprayed the whole downtube or just over the logo? Did you have to do any prep to the paint, and how did you find a matching white?

Did you spray a clear coat over the graphics, or just leave as is?

Thx for info.

i half-arsedly rubbed down the paint over the logo area and resprayed most of the downtube, trying to get a decent fade. this worked at the top near the headtube but not down to the bb, there is a definite line where i masked off the chainset. no clearcoat or anything, the whites dont match too well. it still looks decent unless you inspect it fully, but i just did it as a test really, to see if the new decals looked ok. like i say, i will probably get the whole thing done pro soon.

got them custom cut from a signmaker and the red bit is just a scrap of red vinyl i cut to go behind the 'C'

pretty sure its 125° but cant remember. it's not a road stem, just a cheap ish mtb one, but i wanted the bars lower and cant find anything else.

thanks, was thinking of getting the frame resprayed too. basically the same but with the blue bits turned black to match the text

that would be fresh to death

looks like it is true

In Wikipedia Italian translation "397.27 m track cyclin"

if that's true then you might just be 1 pound richer